网上赌搏网站十大排行可以提供一系列快速挂钩和支架，以适应伸缩处理和拖拉机装载机.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

Murray Push off Buckrake有三种不同的版本:一种是专用于伸缩处理程序, one is to suit the front or rear linkage of tractors and the last is a contractor version.

The Telehandler version consists of a rigid back frame constructed from heavy duty box section, with a row of 1400mm long heavy duty tines along the bottom. The "push off gate" is hinged from the top of the back frame, 闸门也有一个皮瓣铰接在底部，它遵循的轮廓时，通过推离周期. The gate is activated by two double acting hydraulic cylinders.

On the tractor version the main difference is the "push off gate" which is operated by a cantilever system allowing better discharge going up steep slopes.

网上赌搏网站十大排行也做上述的承包商版本，这是一个重型机器配备更强的1500mm长时间.

• Tractor
• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Murray Access Platform comes in various sizes and attach to any fork lift, loader or telescopic handler.

Our access platforms comply with all health and safety regulations to allow personnel to be lifted safely to carry out various tasks. Access platforms can come fitted with fork pockets or telehandler brackets.

• Backhoe
• Front Loader
• Forklift
• Telehandler
• Agriculture
• Forestry
• Construction
• Engineering
• Renewables
• Municipal

The Murray Potato Box Tippler is a heavy duty attachment capable of tipping 1 ton capacity potato boxes through a full 360 degrees to the right or left.

Top and side arms are provided for locating the box in a position during the tipping operation, 侧臂可以定位在右边或左边，两者都是可调的，以适应不同的盒子尺寸.

The Tippler is driven by a hydraulic motor – gearbox and duplex chain final drive. The axle revolves in large phosphor bronze bushes with grease lubrication.

• Front Loader
• Forklift
• Telehandler
• Loading Shovel
• Agriculture

The Murray Implement Mover is designed to fit onto any telescopic handler with the purpose of moving any implement fitted with three point linkage.

The mover has a large heavy duty hook which locates onto the top link pin on any implement therefore allowing the operator to move implements around the yard or into storage very quickly.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Waste Handling

The Murray Road Sweeping Brush is mounted on a rugged frame and can be fitted with three point linkage brackets or loader fittings.

The brush can be angled to the left, right or straight ahead which makes it a very versatile machine for keeping roads, car parks and yards clear of debris.

• Tractor
• Skid Steer
• Front Loader
• Telehandler
• Agriculture
• Construction
• Waste Handling
• Municipal

默里拖拉机重量箱来在各种尺寸和重量，并有前联动支架安装. The Weight Box can be supplied empty for self filling or can also be supplied filled with concrete.

They can be fitted with front marker lights and have provision for a tool box.

• Tractor
• Backhoe
• Agriculture
• Forestry

The Murray Machinery Yard Scraper is for the clearing and cleaning of smooth surfaces around the farm to improve hygiene and prevent slipping.

The Yard Scraper comes in various widths and can have fixed or adjustable side wings. A heavy duty replaceable rubber edge makes for a long wearing implement.

• Tractor
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Waste Handling

Gold Award Winner at the Royal Highland Show Techinacl Innovation Awards 2023

Silver Award Winner at the Royal Highland Show Technical Innovation Awards 2020

美利砾石路平地机的目的是修复已年久失修的砾石路, to a new and pristine condition.

砾石路面的维护是一个长期存在的问题，维修和保养费用非常昂贵, in terms of the need to add extra material to fill pot holes and low points and the man hours it takes to get the job completed.

The Murray Gravel Road Grader in its standard guise has been on the market for a number of years now, but in recent times the Road Grader has undergone a major upgrade, with the addition of hydraulically operated Ripper Teeth and hydraulically operated Tilting Frame. The most recent change to the Murray Road Grader is the new addition of a rear Packer Roller.

The Murray Road Grader is now able to carry out four different functions in the same machine, and in utilising stone from the existing road surface, great savings can be made on time, effort and the money spent on maintaining your gravel road.

The Ripper Teeth, when deployed at the start of the grading process, allow the operator to “break” the hardened surface of the gravel road, which in turn allows the loose stone and aggregate to be collected by the Grader. 道路平地机将把它搬运到一个坑或低点，然后把材料沉淀下来. The action of the Ripper Teeth eliminates the need of the road owner to hire costly diggers and machinery to carry out this process.

The addition of the hydraulically operated Tilting Frame allows the operator to alter the camber on the whole width of the graders levelling frame, thus allowing the road to be sloped to one side or another, therefore rain water management is greatly improved.

The most recent change to the Road Grader is the new addition of the rear Packer Roller. Once the first functions have been carried out: ripping, grading, cambering and levelling, the rear Packer Roller can be deployed. This will further compact and seal the surface of the road ensuring a more long-lasting surface, and no more costly repairs on vehicles and machinery.

The Murray Gravel Road Grader can be used on farm roads and drives, estate roads and forest roads.

• Tractor
• Agriculture
• Forestry
• Construction
• Municipal

The Murray Double Bale Spike is constructed from heavy duty box section and has four heavy duty tines bolted into sockets along the bottom frame of the spike.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Murray Single Bale Spike is made from heavy duty box section and has two 1100mm tines bolted into sockets along the bottom frame of the spike. This is ideal for handling one round bale at a time.

• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

Silver Award Winner at the Royal Highland Technical Innovation Awards 2015

The Murray Octa-Quad Bale Handling System will transport twelve big round bales or six full sized big square bales fully mounted on any large tractor, and is designed to clear fields of big round bales and or big square bales very quickly.

该系统由安装多捆钉的后拖拉机和安装多捆钉的前拖拉机组成, capable of up lifting twelve big round bales or six big square bales in one operation.

The rear multi bale spike transporter fits on to the rear linkage of any large tractor and can uplift eight round bales in two tiers, four round bales on the upper frame and four round bales on the lower frame, 上下框架都由两个折叠的“翅膀”组成，左右铰链连接到一个中央框架, and are activated by hydraulic cylinders. Once the four bales have been spiked onto the upper and lower frames, the wings can then be folded up from the horizontal position to a vertical position, therefore changing the bale width from four wide to two wide.

前面的多捆穗运输适合到前面的任何大型拖拉机配备了一个前联动. The front transporter works in the same way as the rear transporter, but uplifts two round bales on the upper frame first, and then two round bales on the lower frame, when the bales are loaded onto the lower frame, 上部框架可以降低，使上部包现在在前面的较低的包为司机的能见度

When uplifting big square bales, the Octa-Quad system will uplift four big square bales and fold them up from the horizontal position to a vertical position on the rear transporter, 一个大的方形包在上面的架子上一个大的方形包在下面的架子上.

Please see our YouTube channel to see our Murray Machinery Octa-Quad in action.

• Tractor
• Agriculture

The Murray Big Bale Stacker is designed to stack two or three big round bales up to 5' diameter on their end or on their diameter.

The Stacker consists of a central rigid box section frame with a hinged gate either side. The gates have a row of short spikes on their outer edge and are activated by a double acting hydraulic cylinder bales can easily be stacked 4 high with a front end loader or higher with a telescopic handler.

Stacking bales with the Murray Big Bale Stacker is one of the safest methods available.

• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Murray Square Bale Stacker is designed to stack square bales up to 1200mm x 1200mm x 2500mm.

The stacker consists of a central rigid box section frame with hinged gates at either side. The gates have curved tines bolted into sockets that are welded to the outer edge of the gates and are activated by two double acting hydraulic cylinders. The Square Bale Stacker can be fitted to any telescopic handler or large tractor loader.

The Murray Square Bale Stacker can also stack round bales, in a single column or two columns side by side at any one time.

Please see video 1, video 2 and video 3 on our YouTube channel to see the Big Square Bale Stacker in action.

• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Murray Double Bale Spike is constructed from heavy duty box section and has four heavy duty tines bolted into sockets along the bottom frame of the spike.

The Murray Double Bale Spike also comes in a "fold up" version, this is to allow the operator to fold the protruding tines up safely when travelling along the public highway when fitted to the front or rear of any tractor.

• Tractor
• Agriculture

The Murray Big Bale Transporter is a multi-bale spike capable of up-loading four big bales up to 5 ft diameter in one operation, so enabling the tractor operator to clear a field of bales in a very short time.

The implement fits onto the rear linkage of any tractor and lifts the bales in two tiers, two on the upper frame and two on the lower frame. 上部的包被一个单作用液压缸提清楚，以允许下部的包被捡起. The frames are constructed of heavy box section for maximum rigidity and are fitted with machined tapered sockets for the tines in each frame.

The Murray Big Bale Transporter also comes in a "fold up" version, this is to allow the operator to fold the protruding tines up safely when travelling along the public highway when fitted to the rear of any tractor.

• Tractor
• Agriculture

The Murray Wrapped Bale Handler is designed for handling big round bales wrapped with plastic film without causing damage to the film.

The Bale Handler consists of a rigid box section frame with two arms pivoted on the bottom. A double acting hydraulic cylinder is attached between the arms, two rotating rollers are then attached to the lower end of the arms. When the hydraulic cylinder is activated this allows the rollers to extend outwards to allow entry under the bale and then inwards to lift the bale.

一个慷慨的缓冲板在前面的后框架防止损坏时，开车向前拿起包.

By extending the back frame, two sets of arms and rollers can be fitted to allow the operator to lift two wrapped bales at once.

To further enhance the use of the machine, 一个包运输顶部框架可以安装，允许操作员在收获时携带4包稻草.

• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Waste Handling

The Murray Wrapped Bale Clamp is designed for handling and stacking wrapped bales on their ends.

It has a rugged reliable tubular and box section frame, with a double acting hydraulic cylinder to open and close the gate. Due to the design of the clamp, wrapped bales can be stacked close together therefore ensuring a more stable stack.

• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Waste Handling

The Cable Spooling Skid Frame can be manufactured to suit most sizes of cable reels and is very versatile due to the fact that it can be fitted to most flat trailers with the relevant carrying capacity.

• Construction
• Engineering

The Seed Metering Drill Wheels can be made to suit various fertilisers, spreaders and seed drills and can be a replacement for the rubber tyred drive wheels.

• Agriculture

默里料斗有各种尺寸和容量，可用于一系列不同的应用.  Discharge doors can be fitted if required to control or close off flow.

• Agriculture
• Forestry
• Construction

The baggage trolley is used for the transporation of goods. 网眼向下的侧面允许更容易地看到和访问的网上赌搏十大网站和/或行李包含在手推车内.

行李搬运小车可以根据客户的要求制造成任何尺寸和重量容量. They can also have front or front and rear steering axles.

• Municipal

The Murray Pipe Stabilising Clamp is designed to be fitted to any large fork lift or telescopic handler to stabilise long loads or long pipes when being transported over uneven ground or when loading and unloading lorries.

The clamping mechanisms are activated by hydraulic cylinders and have large rubber sections fitted to prevent slippage and damage to the loads.

• Forklift
• Telehandler
• Construction
• Engineering

The Christmas Tree Mover and Christmas Tree Pallet Handler are part of our bespoke portfolio of handling attachments designed and manufactured to handle specialised materials.

• Tractor
• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Forestry

墨利啤酒桶用于将啤酒或糖蜜等液体从储罐转移到进料槽.

Please see our YouTube channel to see how the Pot Ale bucket can transfer the pot ale to feeding trough with ease.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Bucket Grab can be used to further enhance the loading of difficult materials. It consists of a general purpose bucket with a top grab fitted. This creates an attachment that can be used all around the farm, forest or any location.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Murray Ejector Bucket is designed for use within the forestry and renewable sector. 这是为了将原木安全装载到生物质锅炉中，也是为了清除之后的灰. It is a great way to offload logs speedily and efficiently.

The hydraulic cylinder allows for the continuous push of the logs into the biomass boiler/furnace.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Forestry
• Renewables

The Muck Fork Bucket Grab combination can carry out three different functions within the one machine, therefore eliminating the need for three different attachments for three different jobs. This implement also saves time by removing the need to change from one attachment to another.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Rehandling Bucket is designed to handle a mulitude of different materials but can be tailored to handle specific materials also. The Rehandling Bucket can be fitted to any tractor loader or telescopic handler or loading shovel.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

The Murray Bucket Brush can be fitted to most grain buckets or general purpose buckets.

The brush, which is driven by a hydraulic motor, comes in various widths and is a great asset when it comes to cleaning up around the farm or yard.

• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Construction
• Waste Handling
• Municipal

The Murray Four in One Bucket is a multi-purpose bucket/blade with a variety of applications around the farm or building site.

The bucket comprises of two halves; the rear half being attached to any loader or telescopic handler and the front half or blade is attached to the rear half by two pivot pins at the top. The front blade is activated by two double acting hydraulic cylinders allowing it to be opened or closed to the operator’s particular requirements.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Construction
• Waste Handling

The Murray Forklift Hydraulic Tipping Bucket is designed for standard mast type forklifts where there is no hydraulic tipping mechanism available.

The hydraulic tipping bucket consists of a standard bucket shell, 后部有一个液压倾卸架和两个双作用液压缸来激活铲斗.

To attach the bucket to the forklift, the pallet forks have to be removed, the bucket tipping frame is then attached directly on to the fork carriage and is powered by the fork lift's own hydraulic system.

• Forklift
• Agriculture
• Forestry
• Construction
• Waste Handling

The Murray General Purpose Bucket is designed for heavier work around the farm or building site and is strong enough for digging stones and earth.

It has extra bracing at all the stress points and has an anti-spill extension at the top. 

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

The Murray Fork Lift Drive in Grain Bucket is a Hi-Tip bucket designed to suit standard mast type fork lifts where there is no hydraulic tipping mechanism available.

The Drive in bucket consists of a bucket shell attached to a separate undercarriage. The undercarriage is fitted with pockets which allow the fork lift operator to drive into with the machines standard pallet fork toes, two double acting hydraulic cylinders activate the bucket and effect complete tipping at high level.

• Forklift
• Agriculture

墨累侧面倾卸斗的设计允许负载被排出到侧面以及前面. The side tipping bucket is a combination of a conventional bucket fitted to a separate under carriage which is pivoted at one end and is activated by a large double acting hydraulic cylinder.

The side tipping bucket can be fitted to any tractor loader or telescopic handler.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Construction
• Waste Handling

默里Hi-Tip谷物桶是一个标准谷物桶壳的组合，安装在一个单独的马车下, which is pivoted at the front of the bucket.

两个双作用液压缸激活铲斗并在非常高的水平上完成倾卸. Not only can the Hi-Tip Bucket gain between 1 and 1.5 metre extra discharge height, it also achieves approximately 1 metre extra forward reach. This can be a great advantage when loading high-sided vehicles.

As with all other implements, 高尖铲斗可以安装一系列固定支架，以适应大多数装载机和伸缩处理程序.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Renewables

The Murray Grain Bucket comes in a range of capacities to cover all farm grain handling needs.

Front and side leading edges are reinforced for extra durability, wear strips are provided on the underside and bracing on the inside of the bucket all lead to a grain bucket capable of enduring the rigorous of modern grain handling.

A range of fixing brackets are available to suit most loaders and telescopic handlers.

Visit our YouTube channel to see a 2.5 ton Grain Bucket being used.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Waste Handling Bucket is a specialised heavy duty bucket designed for larger telescopic handlers and loading shovels to handle rigorous environment of waste handling.

They can be fitted with bolt on front wareing edges as an optional extra.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Waste Handling

The Push-Off Bucket is used when convensional buckets have difficulty operating such as loading sticky materials like hen pen or well rotted dung. The push-off gate is operated by two hydraulic cylinders. The Push-Off Bucket can be fitted to a variety of loaders.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Construction
• Waste Handling
• Renewables
• Municipal

The Murray Stone Rake is designed for use with a 360 degree slew excavator to grade stone on various applications or reinstate top soil where stones are present.

The Stone Rake can be made in various sizes and widths.

• Backhoe
• 360 Excavator
• Agriculture
• Forestry
• Construction

The Murray Ripper Tooth is designed for use in heavy duty environments where digging, excavating and quarrying need to take place.

The implement tip is replaceable making the implement last longer.

• Backhoe
• 360 Excavator
• Construction

The Murray Muck Fork range is manufactured to suit from the smallest tractor loader right up to the largest telescopic handlers and loading shovels. They are all well-constructed from heavy duty box section to create a rigid frame, the bottom member is fitted with full width tapered sockets to suit the heavy duty tines used.

Muck Forks can be supplied with a fully enclosed back or with "see through" back. Depending on the customers particular requirements, a full range of fixing brackets are available to fit most tractor loaders, fork lifts and telescopic handlers. We also make muck forks to suit contractor models.

The Murray Top Grab further enhances the purpose of the Murray Muck Fork. Its construction consists of a standard muck fork with a top grab fitted. The top grab consists of a rigid box selection frame, which is pivoted on the top frame of the muck fork. Several curved tines are fitted into tapered sockets on the outer frame of the top grab and two hydraulic cylinders activate the grab. This combination leads to a very versatile implement with a multitude of uses around the farm.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Murray Big Bag Lifter is designed to lift up to 4 big bags to a maximum weight of 2.4 tons. Two extra heavy duty tubes are welded to the top of a heavy box section frame giving the bag lifter extra height for filling fertiliser spreaders and seed drills.

该提袋机可以配备一系列安装支架，以适应大多数拖拉机装载机和伸缩处理.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Construction

The Murray Log Grab is a ruggedly constructed frame with two fixed bottom legs and a two leg top grab hinged at the top of the back frame.

The grab is activated by two double acting hydraulic cylinders. The shape of the bottom and top legs allows the grab to squeeze logs of various sizes.

The log grab can be fitted to any tractor loader or telescopic handler.

• Backhoe
• Front Loader
• Telehandler
• Loading Shovel
• Forestry

The Murray Shear Grab Silage Block cutter is designed to cut blocks of silage from a silage clamp.

Its rugged construction comprises of a front half with serrated front blade and straight side blades, which is pivoted to a heavy duty box section rear frame which has a row of heavy duty tines fitted into tapered sockets along the bottom. 前半部分由两个大型液压缸激活，为剪切抓斗提供切割动力.

This can be fitted to any loader, fork lift or telescopic handler.

• Backhoe
• Skid Steer
• Front Loader
• Forklift
• Telehandler
• Loading Shovel
• Agriculture

The Murray Stone Fork is constructed from heavy duty box section to create a rigid frame. Heavy duty tines are fitted into tapered sockets along the bottom of the frame and also up each side. Tines are spaced very closely so as to contain all but the smallest stones.

The stone fork can be fitted to the front or rear of any tractor, telescopic handler or loader.

All our Stone Forks come with a road safe bar included.

• Tractor
• Front Loader
• Telehandler
• Agriculture

默里大型青贮叉设计用于额外的容量，当装载切碎的草到青贮坑.

The frame is more heavily constructed and is fitted with extra heavy duty tines bolted into large tapered sockets fitted along the bottom and the sides of the silage fork.

The Large Silage Fork can be supplied to suit larger telescopic handlers and loading shovels.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Murray Pallet Fork features a rigid steel frame on which the pallet forks are mounted. The forks are solid high carbon steel and are fully certified. They are fully adjustable side-ways by means of a slide on the top and bottom of the back frame, they are located at the desired position by two spring pins.

The implement is available with a wide range of mounting brackets to suit all industrial loaders and heavy duty tractor loaders.

默里托盘叉是一个必须的任何装载机应用，在农场调动托盘材料, industrial premises or construction site are involved.

• Backhoe
• Skid Steer
• Front Loader
• Forklift
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Municipal

The Murray Push Off Muck Grab is a combination of a push off buckrake, a muck fork and a top grab. 这个工具是完美的，如果你希望有一个网上赌搏十大网站，可以用于各种目的周围的农场.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

The Murray Muck Fork with Top Grab is a heavy duty general pupose implement which will cater for most manure moving jobs on and around the farm. It is fitted with two hydraulic rams operating across the top of the machine. 重型直时间安装到后框架的底部成员，而弯曲时间安装到抓斗.

A feature of the construction is the tapered tine socket employed to hold the tine rigidly in the frame; a system assuring the tines will remain secure and tight in their sockets after many hours of rigorous operation.

The implement is available with a wide range of mounting brackets to suit any tractor, loader, front or rear mounted. We also make the muck fork and top grabs to suit contractor models.

• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture

默里谷物推动者的目的是推动谷物相当高的可能比一个标准的粮食桶.

It consists of a blade which is attached to a long box section frame with tractor loader or telescopic handler mounting brackets at the opposite end.

网上赌搏网站十大排行的推粮机还可以用于煤和灰废料的移动，也可以用于推甜菜.

• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Waste Handling
• Renewables

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and the fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms of telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms of telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

As well as our range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adaptors.

They can be supplied to 'hook on' to existing front loader quick hitches to allow them to pick up implements from another loader or telehandler.

Conversion Adaptors can also be supplied as 'direct mount' by removing the existing quick hitch and fitting the new quick hitch conversion adaptor directly onto the tractor loader arms or telescopic handler boom end.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

Murray快速挂件附件的目的是允许操作人员快速地从一个工具更换到另一个工具. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. 如果需要，锁杆可以通过液压缸远程操作，这是一种选择.

The Murray Quick Hitch is a "dedicated" hitch. For example - a Quick Hitch for a Ford loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

Murray快速挂件附件的目的是允许操作人员快速地从一个工具更换到另一个工具. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. 如果需要，锁杆可以通过液压缸远程操作，这是一种选择.

The Murray Quick Hitch is a "dedicated" hitch. For example - a Quick Hitch for a Ford loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

Murray快速挂件附件的目的是允许操作人员快速地从一个工具更换到另一个工具. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. 如果需要，锁杆可以通过液压缸远程操作，这是一种选择.

The Murray Quick Hitch is a "dedicated" hitch. For example - a Quick Hitch for a Ford loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

Murray快速挂件附件的目的是允许操作人员快速地从一个工具更换到另一个工具. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. 如果需要，锁杆可以通过液压缸远程操作，这是一种选择.

The Murray Quick Hitch is a "dedicated" hitch. For example - a Quick Hitch for a Ford loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

Murray快速挂件附件的目的是允许操作人员快速地从一个工具更换到另一个工具. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. 如果需要，锁杆可以通过液压缸远程操作，这是一种选择.

The Murray Quick Hitch is a "dedicated" hitch. For example - a Quick Hitch for a Ford loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

Murray快速挂件附件的目的是允许操作人员快速地从一个工具更换到另一个工具. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. 如果需要，锁杆可以通过液压缸远程操作，这是一种选择.

The Murray Quick Hitch is a "dedicated" hitch. For example - a Quick Hitch for a Ford loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

• Backhoe
• Skid Steer
• Front Loader
• Telehandler
• Loading Shovel
• Agriculture
• Forestry
• Construction
• Engineering
• Waste Handling
• Renewables
• Municipal

The Murray Snow Blade comes in various widths and sizes. The blade can be fixed left or right, or can have a manual slew left or right by removing a pin, or can be activated by a double acting hydraulic cylinder.

All blades can be fitted with a replaceable rubber edge and castor wheels.

Snow Blades can be fitted to tractors, loaders, telescopic handlers and fork lifts.

• Tractor
• Front Loader
• Forklift
• Telehandler
• Agriculture
• Municipal

The Murray V-Snow Plough is designed to clear deeper snow than the smaller snow blade, therefore is more heavily constructed and has replaceable ware plates bolted along the bottom edges.

They can be supplied to clear various widths, and can be fitted to the front or rear of any tractor or telescopic handler.

• Tractor
• Telehandler
• Agriculture
• Municipal